KTC 3/8" Ratcheting Digital Torque Wrench, 12-60 Nm (GEKR060-R3)
Description
Premium 3/8" ratcheting digital torque wrench with advanced features.
3/8" square drive
Torque range: 12-60 Nm with ±4% accuracy
Fixed grip design with electronic torquesensor that accurately detects and analyzes torque load.
Rechargeable lithium polymer battery – it can be used continuously for 12 hours after charging for ~2.5 hours(time varies depending on usage conditions)
3 Different Modes Available:
Measurement Mode: Real-time measurement of current torque value. This is convenient when you want to check the measured value reliably in general tightening work.
Preset Mode: The LED emits light and a buzzer notifies you when a target torque value has been reached. Up to 5 preset values can be set. The LED blinks with an intermittent buzzer sound 90% of the set torque.At 100%, the buzzer changes to a continuous sound and the LED lights up, so it can be used even at angles where the LCD screen cannot be seen.
Pass/Fail Mode: By setting the upper and lower limits of the target torque, it is possible to make a pass/fail judgment and count the number of passes.
Highly visible LED screen with wide viewing angle and backlit display
Torque unit conversion – easily convert from kgf/m, lbf/in, and lbf/ft units. There is no need for troublesome unit conversion calculations where torque is not specified in Nm
Multi-directional – Both forward and reverse directions can be measured
Includes plastic case and charging cable.
Note: Charger is not included.Please prepare a commercially available USB charger